This can cause clogging and may damage the filter.. Cut the brush bar bristles.

Now that the brush bar has been removed from the floorhead, it should be easy to find any potential obstructions.. For example, if there’s thick thread or hair caught around the brush bar, use a pair of scissors to carefully cut and remove it.If there’s any larger debris, then remove this from the bar by hand (make sure you wear gloves and are careful of any potentially sharp material).. You can also use a damp, lint-free cloth to get rid of grime, but avoid using cleaning products or polishes..

This is also a good time to take a look inside the floorhead.Are there any obstructions or blockages that could be affecting the vacuum’s airflow?If so, make sure to remove these..

As we mentioned earlier, you shouldn’t wash the Dyson V10’s floorhead.Removing grime with a damp and lint-free cloth is fine, but don’t run it under a tap.

It’s particularly important to avoid detergents or cleaning products, as these can damage the vacuum..

Step 3: Re-Insert The Brush Bar.Most vacuum cleaners come with a basic set of tools, such as a crevice tool or soft dusting brush.

It’s also common for vacuums to have a combination floor head that can be used for various types of floor..vacuum cleaner accessories.

varies a lot though.Cheaper models might have a very short crevice tool, for example, which makes it less useful for getting in tight spots..